|

|
|
FREE* SHIPPING on most web orders over $100.00 (see details).
Complete Stirrer Systems
These Glas-Col stirring systems feature:
- A wide variety of sizes and horsepower ratings to meet most applications.
- Feedback circuitry to maintain speed even when viscosity changes.
- DC-filtered motors on most models to handle heavier loads and provide greater durability.
- Propellers and paddles for most applications.
- Cord-connected controls for safety and convenience.
- Reversible motors.
| We have 14 basic styles shown here. Click on any item below to see details and options. |
 |
Stirring Heating Mantle w/ StirControl II Control, 115 V This mantle heats and stirs! Sizes from 250 to 3,000 mL. 115 or 230 volts. |
20200 Unit: Each $ 1,125.00
|
 |
Laboratory Magnetic Stirplate Classic laboratory magnetic stirrer with a tough ceramic surface. |
20951 Unit: Each $ 280.00
|
 |
Laboratory Magnetic Stirring Hotplate Classic combo magnetic stirring hotplate with a tough ceramic surface. |
20952 Unit: Each $ 406.00
|
 |
GT31 Stirring System w/ 1/40 horsepower motor, 120V Complete dual shaft stirring system. 120 or 240 V. |
21000 Unit: Each $ 930.00
|
 |
GT331 Stirring System w/ 1/40 horsepower motor, 240V Complete dual shaft stirring system. 120 or 240 V. |
21000-240 Unit: Each $ 1,032.00
|
 |
GT24 Stirring System w/ 1/17 horsepower motor, 120V Complete direct drive, single shaft stirring system. Available in 120V or 240V. |
21002 Unit: Each $ 990.00
|
 |
GT2406 Stirring System w/ 1/17 horsepower motor, 120V Complete single shaft stirring system. Available in 120V or 240V. |
21003 Unit: Each $ 1,200.00
|
 |
GT2412 Stirring System w/ 1/17 horsepower motor, 120V Complete single shaft stirring system. Available in 120V or 240V. |
21004 Unit: Each $ 1,200.00
|
 |
ST20N Stirring System w/ 1/8 horsepower motor, 120V Complete single shaft stirring system. 120 or 240 V. |
21006 Unit: Each $ 1,625.00
|
 |
HST10 Series Stir Tester w/ 1/17 hp permanent magnet DC motor / 120V Complete stir tester system. 120 or 240 V. |
21012 Unit: Each $ 1,750.00
|
 |
HST1006 Stir Tester w/ 1/17 hp permanent magnet DC motor / 120V Complete stir tester system. 120 or 240 V. |
21013 Unit: Each $ 1,750.00
|
 |
HST1012 Stir Tester w/ 1/17 hp permanent magnet DC motor / 120V Complete stir tester system. 120 or 240 V. |
21014 Unit: Each $ 1,750.00
|
 |
HST30 Series Stir Tester w/ 1/4 hp permanent magnet DC motor, 120 V Complete stir tester system. 120 or 240 V. |
21020 Unit: Each $ 2,400.00
|
 |
UF12 Non-aerating Upward Flow Stirrer, 120V Upward flow mixes without introducing air. 120 or 240V. |
21024 Unit: Each $ 1,100.00
|
Stirrer Accessories
We carry a full line of Glas-Col stirrer accessories. The items shown are representative; click to see additional versions/sizes/models.
| We have 17 basic styles shown here. Click on any item below to see details and options. |
 |
Stirring Bar for StirMantles 250-300 mL Available in 4 sizes. |
20235 Unit: Each $ 25.00
|
 |
Stainless Steel 4-blade propeller,1.5 in diameter,1/4 in shaft 3 sizes available. |
21040-A Unit: Each $ 84.00
|
 |
Stainless Steel 4-blade propeller, 2 in diameter, 1/4 in shaft 3 sizes available. |
21041-A Unit: Each $ 98.00
|
 |
Stainless Steel 3-blade propeller,1.5 in diameter, 5/16 in shaft 3 sizes available. |
21042-A Unit: Each $ 92.00
|
 |
Heavy-duty, 3-bladed propeller, 6 in. diameter, 1/2 in. shaft |
21043 Unit: Each $ 245.00
|
 |
S. Steel, 3-bladed paddle, 2.5 in. diameter, 5/16 in. shaft 3 sizes available. |
21045-A Unit: Each $ 98.00
|
 |
Flexible Stirring Shaft with 5/16 in. end fitting 4 sizes available. |
21048-A Unit: Each $ 495.00
|
 |
10 mm Stirring Shaft w/ Teflon® nut and bolt 2 sizes available. |
21050-A Unit: Each $ 109.00
|
 |
Teflon® Stirring Bearing, 10 mm diameter 24/40, 29/42 and 45/50 sizes available. |
21051-A Unit: Each $ 176.00
|
 |
Teflon® Stirring Blade Sizes to fit flasks from 100 to 22,000 mL |
21052-A Unit: Each $ 9.29
|
 |
Flex Coupling for 10 mm OD Glass Stirring Shafts Temperatures up to 650 °C. Sizes from 100 to 22,000 mL. 115 or 230 volts. |
21054 Unit: Each $ 156.00
|
 |
3-Blade Keyless Chuck For GT31, GT24 and HST10N Stirrers 5 different sizes available. |
21055-A Unit: Each $ 122.00
|
 |
Laboratory stand Light and heavy-duty versions available. |
21057 Unit: Each $ 210.00
|
 |
Right-angle clamp for up to 3/4 in (19 mm) diameter rods Light duty clamp |
21060 Unit: Each $ 52.00
|
 |
Adjustable Shelf |
21063 Unit: Each $ 121.00
|
 |
Plug and extension cable for X-Y output of HST Series Stir Testers |
21064 Unit: Each $ 64.00
|
 |
Isolation transformer for HST10 Stir Tester Accessories. |
21065-A Unit: Each $ 243.00
|
|