| Ansul CleanGuard® extinguishers are designed for the protection of commercial and industrial facilities traditionally protected by Halon 1211. Typically, these areas contain sensitive or irreplaceable equipment which could be damaged or destroyed by water, foam, dry chemical, or carbon dioxide. Typical applications include computer centers, data/document storage areas, communications facilities, control rooms, electronics manufacturing, museums, art galleries, laboratories, and many others. DuPont FE-36 replaces Halon 1211 as the agent-of-choice for applications where the agent must be clean, electrically nonconductive, environment-friendly, extremely low in toxicity and exceptionally effective. Because it discharges as a liquid, FE-36 also provides an effective discharge range up to 16 ft. (4.9 m). FE-36 is electrically nonconductive, residue-free, and will not cause thermal shock damage. FE-36 has been accepted by the EPA for commercial, industrial, and military use under the EPAs SNAP program. It boasts zero Ozone Depletion Potential and is not scheduled for phase-out by the Montreal Protocol as is Halotron I. Note:This extinguisher contains steel parts and is therefore not recommended for use around the high magnetic fields generated in MRI or NMR laboratories; for these applications, 100% non-magnetic extinguishers are available (see below). The minimum order for for all hand-held ABC/BC, CleanGuard® and CO2 extinguishers (mix and match) is $250.00. Other store items do not apply towards the $250.00 minimum. Here's why.The shipping charges for extinguishers are based on the quantity ordered and type of extinguisher. These charges will appear as separate line item(s) in your order. Please consult our extinguisher shipping chart for more info. Material Safety Data Sheet (MSDS) for FE-36 agent (92 KB PDF file).
|