FREE* SHIPPING on most web orders over $100.00 (see details).
Item #: 20777 Heating Tape 1/4" x 10', 150W, 120V
In both permanent and temporary applications, this tape heats odd lengths of glass tubes and metal pipes. Ribbon-type heating elements running lengthwise in the tape are encased in durable glass braid and are impregnated and covered with tough silicone rubber, which insulates stranded terminal leads at one end and waterproofs fittings at both ends. These Glas-Col heating tapes:
Are ideal for use in high moisture areas.
Are resistant to most laboratory environmental conditions.
Easily pass a 1,000V test for electrical insulation.
This tape has an attached cord with 2-blade plug and single end termination. Temperature limit: 480 °F (249 °C). Ohms per foot: 9.08. Weight: 0.9 lb. For a corresponding grounded tape see items #20750 through 20773.
Note: Power ratings are for tapes not covered by insulation when installed. If the tape is covered, the temperature should be monitored and controlled to avoid exceeding the 480 °F limit. Short, narrow tapes rated at less than 115 volts must be operated at reduced voltages, which are easily attained with a power control.
Unit: Each
Quantity
Price per Unit
1 - 3
$ 118.00
4 or more
$ 109.15
Usually ships within: 4-5 business days
If you can read this text, our server thinks you are a search engine site indexing program. Contact us toll-free at (866) 326-5412 or email us at esupport@safetyemporium.com if you are seeing this message in error.
Minimum Sizes For Close Spiral Wrapping
Tape Width
Object Diameter
1/4"
3/8" or larger
1/2"
3/4" or larger
1"
1-1/2" or larger
When applying the tape to the object to be heated, wrap it snugly so that the tape is in good contact with the object. DO NOT FOLD OR WRAP THE TAPE OVER ITSELF! This will cause a hot spot in the tape that may destroy the silicone covering.
Tapes should not be close spiral wrapped on objects with diameters smaller than those shown above.