Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 12 - 23 and get 4% off
- Buy 24 or above and get 7% off
THIS PRODUCT HAS BEEN REFORMULATED. The new formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process that does not produce PFOS. We do not have the product data from Ansul yet. The pricing shown here is correct, however the description below is not. The Ansul part number for this new formulation is 443166.
ANSULITE 1% Aqueous Film-Forming Foam (AFFF) concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as various crude oils, gasolines, diesel fuels, aviation fuels, etc.. It is not suitable for use on fuels having appreciable water solubility (polar solvents), i.e., methyl and ethyl alcohol, acetone, and methyl ethyl ketone. It can be used with both aspirating and non-aspirating discharge devices because of the low energy required to make it foam. Its excellent wetting characteristics make it useful in combating Class A fires as well. It can be used with dry chemical extinguishing agents without regard to the order of application to provide even greater fire protection capacity. AFFF general information is available.
ANSULITE 1% Freeze Protected Aqueous Film-Forming Foam (AFFF) Concentrate is formulated from specialty fluorochemical and hydrocarbon surfactants along with solvents. It is transported and stored as a concentrate to provide ease of use and considerable savings in weight and volume. It is intended for use as a 1% proportioned solution in fresh, salt or hard water. It may also be used and stored as a 1% premixed solution in fresh or potable water only. The correct proportioning or mixture ratio is 1 part concentrate to 99 parts of water.
The minimum and maximum usable temperature for ANSULITE 1% Freeze Protected AFFF Concentrate in properly selected proportioning equipment is 20 °F (29 °C) to 120 °F (49 °C), respectively. The Ansul part # for this product is 415301; full performance and technical specifications are available in the Ansul data sheet for this product. The Safety Data Sheet is also available for download.
Shipping: The shipping weight of these pails is 45 pounds (20.4 kg) and there are 36 containers per pallet. Given the heavy weight, a fixed shipping charge of $20 per container will be applied to your order at checkout which is valid only for ground shipment within the lower 48 US states. If you need rush delivery or delivery outside this area, you can contact us before ordering, otherwise, we will contact you with the actual freight costs before processing your order.