Justrite DOT Transport Safety Cans, Type II w/ Pour Spout, 5 gallon

These Justrite DOT Type II Accuflow™ Steel Safety Can with Roll Bars are available in red (for gasoline) or yellow (for diesel) with a 9" (229 mm) metal hose in your choice of a 5/8" (16 mm) or 1" (25 mm) diameter.  These cans are used for over-the-road transport of flammable liquids such as gasoline and as a safety can for onsite fuel dispensing in industries including, but not limited to, construction, landscaping, mining, golf course maintenance, and tow truck operation.

AccuFlow's exclusive Safe-Squeeze® trigger mechanism opens the piston-actuated spout and vacuum-release valve for glug-free, fast and accurate pouring. Release the handle to instantly close the valve and guard against spills. 

Built-in safety features include an internal stainless steel flame arrester to dissipate heat preventing flashback ignition, a leak-tight, self-closing lid automatically venting between 3 and 5 psig (0.2 and 0.35 bar), and heavy roll bars to protect the spout. The safety can exterior includes a large ID zone to write and identify contents, in order to avoid misuse or mixing incompatible products.

Note: When in travel mode, a hold-down bracket is tethered to the lid with an easy-to-grasp tightening screw that prevents vapor release and spills during transport.  Place DOT safety cans in usage mode for on-site fuel dispensing. When the tethered magnetic bracket is loosened, it rests on top of the can, preventing parts from getting lost.

These cans feature a fusible link bracket that engages easily when used to transport fuel. In cases of extreme heat or fire conditions, the fusible link melts at 165° F (74 °C). This allows the lid to vent and relieve pressure, preventing dangerous pressure buildup that could lead to a rupture or explosion. When the fusible link bracket is disengaged, the can acts as a standard safety can and should not be used for transporting fuel. 

These cans are FM Approved and come with a 10-year limited warranty. They meet DOT, HM-181, and OSHA compliance requirements, comply with NFPA code 30, have United Nations (UN) approved marking 1A1/Y1.2/100, and are an accepted container under CARB.

Additional Type-I and Type-II safety cans in a variety of materials and sizes are also available. Type I cans feature 1 opening and Type II cans like this one have two openings, one for dispensing and one for pressure relief. 

Dimensions: 11.75" diameter x 18.52" h (299 x 445 mm). Pour/fill hole diameter: 1.68" (43 mm).

Weight: 12.5 lb (5.7 kg).

Justrite model #'s: 1" spout: 7350130 (red) and 7350230 (yellow). 5/8" spout: 7350110 (red) and 7350210 (yellow).

A safety can chemical compatibility chart is available as a PDF file.

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.