NEW! COVID-19 Products
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 6 or above and get 5% off
Ansulite™ AFC6B 6% AFFF (Aqueous Film-Forming Foam) Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as various crude oils, gasolines, diesel fuels, aviation fuels, etc. It is not suitable for use on fuels having appreciable water solubility (polar solvents), i.e., methyl and ethyl alcohol, acetone, and methyl ethyl ketone. It can be used with both aspirating and non-aspirating discharge devices because of the low energy required to make it foam. Its excellent wetting characteristics make it useful in combating Class A fires as well. It can be used with dry chemical extinguishing agents without regard to the order of application to provide even greater fire protection capability.
This product is intended for use as a 6% proportioned solution in fresh, salt or hard water (water hardness should not exceed 500 ppm expressed as calcium and magnesium.) The correct proportioning or mixture ratio is 6 parts of concentrate to 94 parts of water. The Ansul part # for this product is 443115; full performance and technical specifications are available in the Ansul data sheet for this product. The Safety Data Sheet is also available.
For the MIL SPEC version of this product (specially formulated and documented to meet US military requirements), see item # 50056.
Technical Note: This product replaces Ansulite 6% AFFF, Ansul P/N 432155, which was discontinued in February of 2018. This replacement, ANSULITE AFC1B Concentrate, is an environmentally-mindful formulation that contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not break down to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. EPA 2010/15 PFOA Stewardship Program.
Shipping: The shipping weight of these pails is 495 pounds (224.5 kg) and there are 4 containers per pallet. Given the heavy weight, a fixed shipping charge of $100 per container will be applied to your order at checkout which is valid only for ground shipment within the lower 48 US states. If you need rush delivery or delivery outside this area, you can contact us before ordering, otherwise, we will contact you with the actual freight costs before processing your order.