CYBER SAVINGS: NIOSH-Approved N99 Masks for less than 60 cents! Get them now!
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 12 - 23 and get 2% off
- Buy 24 or above and get 5% off
Ansulite™ A137 1%x3% AR-AFFF (Alcohol-Resistant Aqueous Film Forming Foam) Concentrate is formulated from special fluorochemical and hydrocarbon surfactants, a high molecular weight polymer, and solvents. It contains no PFOS or PFOA. It is intended for use as a 1% proportioned solution on hydrocarbon fuels and as a 3% proportioned solution on polar solvent fuels in fresh, salt, or hard water. Water hardness should not exceed 500 ppm expressed as calcium and magnesium.
This agent can be use on conventional Class B hydrocarbon fuels such as gasoline, diesel fuel, etc. or a Class B polar solvent (water miscible fuel) such as methyl alcohol, acetone, etc. Its excellent wetting characteristics make it useful in combating Class A fires as well. Because of the low energy required to make foam, it can be used with both aspirating and non aspirating discharge devices.To provide even greater fire protection capability, it may be used with Purple-K dry chemical extinguishing agents without regard to the order of application to provide even greater fire protection capability.
Technical Note: This product replaces Ansulite 1x3 F-601A AR-AFFF, Ansul P/N 437187, which was discontinued in February of 2018. This replacement, A137 1%x3% AR-AFFF Concentrate, is an environmentally-mindful formulation that contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not break down to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. EPA 2010/15 PFOA Stewardship Program.
Statement on the use of perfluoroalkyl-containing firefighting foams
California has banned most firefighting aqueous film-forming foams (AFFF) that contain perfluoroalkyl substances (PFAS) effective January 1, 2022. We will no longer sell this product to users or purchasers in California. Ansul now offers a non-fluorinated foam product for Class B fires which is available as item # 50071. Ansul is continuously revamping its firefighting foam product line and as additional non-fluorinated alternatives become available we will offer them for sale.
Safety Emporium is unable to offer advice on the application, use, environmental fate, or health effects of these materials and offers them in good faith given the need within the firefighting community and given the manufacturer's implied warranty of merchantability. All potential purchasers should consult pertinent local, state, federal, and international regulations regarding PFAS-containing products and seek out emerging health and environmental data and guidance before choosing to purchase or use this product per the manufacturer's recommendations.
Shipping: The shipping weight of these pails is 45 pounds (20.4 kg) and Ansul normally ships 24 pails per pallet. Given the heavy weight, a fixed shipping charge of $20 per container will be applied to your order at checkout which is valid only for ground shipment within the lower 48 US states. If you need rush delivery or delivery outside this area, you can contact us before ordering, otherwise, we will contact you with the actual freight costs before processing your order.