CYBER SAVINGS: NIOSH-Approved N99 Masks for less than 60 cents! Get them now!
The WaterSaver Faucet Company's BO140S-G ten serration hose end for laboratory gas valves has a 3/8" NPT male inlet and is constructed of chrome-plated brass. It is compatible with most WaterSaver valves such as the L4100, L4200, L2870 series valves and more.
The overall length is 59.5 mm and the installed length is approximately 50 mm. The outlet tip diameter is ~5 mm, the diameter of the middle barb is 11 mm, and the largest barb is ~14 mm. This item installs with an 13/16" wrench or crescent wrench. An O-ring is included to ensure a gas-tight seal.
For water faucet applications, the BO140S-W seven-serration outlet is recommended.
For an angled ten-serration gas hose end, see item # B0142.
Special order options: Also available with an epoxy coating or as a satin chrome finish (with optional epoxy coating). The Nylon® version of this hose end, part # PO140S, is available in blue, brown, green, light blue, orange, red, white, yellow or black. Please contact us by email for quotes on these versions.
FOR LABORATORY USE ONLY.