Distillation Adapters, 75 Degree Angle for use with Jointed Thermometer

This distillation adapter has a standard taper outer joint at the top of the main tube for use with jointed thermometers. The 10/18 size is for use with 10/18, 25 mm immersion thermometers while the 10/30 is for use with 10/30, 75 mm immersion thermometers. The bottom and sidearm are at a 75° angle. Both have inner joints.

In a typical use, one places a jointed thermometer in the joint at the top and a reflux condenser on the angled side joint.

These are available in 14/20, 19/22, 24/40, and 29/42 joint sizes.

For a similar distillation adapter with a standard taper joint at the top see item # CG-1022.

For a similar distillation adapter with a rubber fitting to accept unjointed thermometers, see item # CG-1026.

For a similar distillation adapter with a Chem-Thread fitting to accept thermocouples, probes, tubes, and unjointed thermometers, see item # CG-1027.