NIOSH-Approved N95/N99 Masks for about $1 Get them now!
The Guardian Equipment G5046 is a wall mounted dual-head combination eyewash and drench hose that is activated by squeezing the handle of the wall-mounted spray head. The spray head is easily removed from the mounting bracket to rinse the eyes, face, body or even equipment. The G5014 is similar but is activated using a saparate flag handle that remains open until manually reset. The G5016 is also similar but is a single head unit that is not rated as an eyewash.
Application: Dual purpose eyewash/drench hose for wall mounting. Unit meets the provisions of ANSI Z358.1 - 2014 as both an eyewash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 12' reinforced nylon retractable coiled hose. 180 PSI maximum rated working pressure.
Supply: 3/8" NPT female inlet.
Mounting: Bracket with spring clips to hold unit on wall. Clips position spray heads and handle to face forward at all times.
Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5046BP only). Note: Check with code authority for compliance with local plumbing code.
Sign: ANSI-compliant identification sign, item # 250-006G.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
BP Dual in-line dual check backflow preventer. Check with code authority for compliance with local plumbing code.
VB In-line vacuum breaker for installation between valve and spray head.
All Guardian items are manufactured in the USA. Approximate shipping weight is 4 pounds (1.8 kg) and the approximate shipping dimensions are 13" x 9" x 9" (33 x 23 x 23 cm).
2-year limited manufacturer warranty.