- Drench Hoses
- Guardian G5041 Eyewash/Drench Hose Unit, 45 Degree Panel Mounted
CYBER SAVINGS: NIOSH-Approved N99 Masks for less than 60 cents! Get them now!
The Guardian Equipment G5041 is a combination deck-mounted drench hose and eyewash that is activated by squeezing the lever on the spray head. The unit can be used on the panel or the user can pull out the 8 foot hose to drench the affected areas of their body. The G5022 is similar but is mounted on a countertop.
Application: Dual purpose eyewash/drench hose unit for wall mounting. Unit meets the provisions of ANSI Z358.1 - 2014 as both an eyewash and a drench hose. Unit may be left in the angle holder for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 8' reinforced PVC hose. 300 PSI maximum working pressure.
Supply: 3/8" NPT male swivel-type inlet.
Mounting: Angle flange for 45 degree panel mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.
Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5041BP only). Note: Check with code authority for compliance with local plumbing code.
Sign: ANSI-compliant identification sign, item # 250-006G.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
BP Dual in-line dual check backflow preventer. Check with code authority for compliance with local plumbing code.
VB In-line vacuum breaker for installation between valve and spray head.
An optional G6020 thermostatic mixing valve (tempering unit) which precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1-2014 may be required under your state or local plumbing codes.
Documentation available: G5041 specification sheet w/ measured drawings, installation, opertion and maintenance guide, and written specifications (Word format).
Common replacement parts: 470-004R replacement GS-Plus™ foam filters (6/pkg), 470-005R replacement GS-Plus™ flow controls (6/pkg), and AP470-001 replacement GS-Plus™ spray head.
All Guardian items are manufactured in the USA. Approximate shipping weight is 5 pounds (2.3 kg) and the approximate shipping dimensions are 12" x 11" x 4" (30.5 x 28 x 10 cm).
2-year limited manufacturer warranty.