The Guardian Equipment G5022 is a vandal-resistant combination deck-mounted drench hose and eyewash that is activated by squeezing the lever on the spray head. The standard version is the G5022. The GVR5020 is also similar but has only a single spray head and therefore does not qualify as an eyewash under ANSI standards.
Application: This vandal-resistant dual-purpose eye wash/drench hose for deck mounting is ideal for use in schools and other areas where equipment might be subject to abuse. The unit meets the provisions of ANSI Z358.1 - 2014 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving user’s hands free. Alternatively, the unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two vandal-resistant GS-Plus™ spray heads mounted side-by-side. Each head has a brass body, stainless steel “flip top” dust cover, internal flow control and filter to remove impurities from the water flow. Each spray head has a retaining ring with set screw to protect the internal components.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 8' reinforced PVC hose. 300 PSI maximum working pressure.
Supply: 3/8" NPT male swivel-type inlet.
Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.
Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5022BP only). Note: Check with code authority for compliance with local plumbing code.
Sign: ANSI-compliant identification sign, item # 250-006G.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
BP Dual in-line dual check backflow preventer. Check with code authority for compliance with local plumbing code.
DC Stainless steel dust cover for each spray head.
FSH 8 ft. flexible stainless steel hose in place of PVC hose.
HG Undercounter hose guide bracket to prevent hose from tangling or binding.
VB In-line vacuum breaker for installation between valve and spray head.
All Guardian items are manufactured in the USA. Approximate shipping weight is 4 pounds (1.8 kg).
2-year limited manufacturer warranty.
Customers also viewed
Guardian GFR3310 Heated Safety Station with Eyewash, IEEE Compliant, Top Inlet, Rated for Class I, Division 2 Environment$3,150.00
Guardian GFR3300 Heated Safety Station with Eyewash, IEEE Compliant, Top Inlet, Rated for Class I, Division 2 Environment$3,150.00
Guardian GBFVR1909SC Vandal-Resistant Safety Station w/ WideArea™ Eye/Face Wash and Stainless Steel Bowl$1,310.00