The Guardian Equipment GVR1903SC is a vandal-resistant combination eyewash and safety shower station ideal for use in schools and other areas where equipment may be subject to abuse. All threaded connections are secured with set screws or cement to prevent disassembly. The GBFVR1909 is a similar model equipped with four GS-Plus™ spray heads which provide an eye/face wash capability rather than eyewash.
NOTE: This model is the recommended replacement for the GVR1903SC which was identical but had self-closing valves. Guardian no longer manufactures self-closing valves as these do not meet ANSI standards.
Application: A combination eyewash and shower safety station with vandal-resistant construction. Ideal for use in schools and other areas where equipment may be subject to abuse. All threaded connections are secured with set screws or cement to prevent disassembly. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.
Shower Head: 8" diameter chrome plated cast brass shower head with 20 GPM flow control.
Shower Valve: 1" IPS chrome plated brass stay-open ball valve with stainless steel actuating arm and 29" stainless steel pull rod.
Spray Head Assembly: Two vandal-resistant GS-Plus™ spray heads, each with a brass body, stainless steel “flip top” dust cover, internal flow control and filter to remove impurities from water. The spray heads have a retaining ring with set screw to protect internal components.
Eyewash Bowl: 11-1/2" stainless steel.
Eyewash Valve: 1/2" IPS chrome plated brass stay-open ball valve.
Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.
Supply: 1-1/4" NPT female top or side inlet.
Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 9-1/4" or 19-5/8" above finished floor by reversing lower pipe nipples.
Sign: Furnished with ANSI-compliant identification sign, item # 250-008G.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AP250-015 Modesty curtain for mounting on safety station.
AP275-200 Electric Light and alarm horn summon assistance when eye/face wash or shower is activated.
All Guardian items are manufactured in the USA. This item ships in a box approximately 33" x 17" x 9" (84 x 43 x 23 cm) weighing approximately 42 pounds (19 kg). The freight class is 85.
2-year limited manufacturer warranty.
Customers also viewed
Guardian GFR3310 Heated Safety Station with Eyewash, IEEE Compliant, Bottom Inlet, Rated for Class I, Division 2 Environment$3,425.00
Guardian GFR3210 Heated Safety Station with Eyewash, Bottom Inlet, Rated for Class I, Division 1 Environment$4,100.00
Guardian GFR3300 Heated Safety Station with Eyewash, IEEE Compliant, Top Inlet, Rated for Class I, Division 2 Environment$3,425.00
Guardian GFR3110 Heated Safety Station with Eyewash, Bottom Inlet, Rated for Class I, Division 2 Environment$2,780.00
Guardian GFR3200 Heated Safety Station with Eyewash, Top Inlet, Rated for Class I, Division 1 Environment$4,100.00
Guardian GBFVR1909 Vandal-Resistant Safety Station w/ WideArea™ Eye/Face Wash and Stainless Steel Bowl$1,310.00