- By Class
- Class A
- Ansul Sentry 2.5 Gallon Water Fire Extinguisher
CYBER SAVINGS: NIOSH-Approved N99 Masks for less than 60 cents! Get them now!
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 24 or above and get 5% off
Sentry™ water extinguishers are designed to protect all types of areas containing Class A (ordinary combustibles) fire hazards except those with Class C (energized electrical equipment) potential (see item 09662 for a Class C-rated water mist extinguisher). Water extinguishers are a terrific choice for protection of areas containing common pool chemicals (which are dangerously incompatible with ABC and BC dry powder agents), provided that the chemicals are properly stored and no electrical hazard exists.
These units feature a 7 inch (178 mm) stainless steel butt-welded shell for long life and corrosion resistance. Each extinguisher includes a color-coded pressure gauge, Schrader (tire type) valve for pressurization, and 6-year manufacturer's warranty. UL listed.
This item is shipped empty and has an approximate shipping weight of 9 lb (4.1 kg). There are 30 of this item in a pallet (approximately 4' x 4' x 4'). You will need to charge the extinguisher with water and compressed air according to the manufacturer instructions.
|Agent Capacity||2.5 gal (9.46 L) water|
|Ansul Model #||W02-1|
|Ansul Part #||430847|
|Shipping Weight||9.0 lb (4.1 kg)|
|Charged Weight||28 lb (12.7 kg)|
|Service Pressure||100 psi (6.9 bar)|
|Height||25.5 in (647 mm)|
|Width||Width 9 in (229 mm)|
|Depth (Diameter)||7 in (178 mm)|
|Range||~ 35 ft (10.7 m)|
|Discharge time (seconds)||~ 50 seconds|
|Hose Diameter||3/8 in (9.5 mm)|
|Temperature Range||40 to 120 °F (4.5 to +49 °C)|
|Hydrostatic Test Requirement||Every 5 years|